Ground Socket and Cap Kit for Pocket Fences Includes Install Tool and Auger (36 Sleeves and 36 Caps)

This listing includes the following: one auger bit, one ground sleeve installation tool, 36 ground sleeves, and 36 yellow caps. The posts and fence are not included. You select the number of caps and sleeves. The outside(end) posts will bend due to their flexibility. Angle them out slightly when installing. If you want them to be stiffer, you can cut a 10' piece of 1/2" electrical conduit in half and insert them inside the 2 outside poles. They are hollow, so they fit right in. If you live in a very windy area, you will want to cable tie the fence at the bottom of the pole or stake it down. Use an auger bit in your cordless drill, or a six-foot bar, to make a pilot hole before tapping in the ground sleeve. You are going to love this! Instead of weed-eating around this fence, pull it up, throw it to the side, mow where it was, and put it right back up in a few minutes. Returned items may be subject to a 20% restocking fee.

• One auger bit, one installation tool, 36 ground sleeves, and 36 yellow caps are all that is included
• Pocket fence is not included
• One-inch PVC pipe that is five feet long schedule 40 is not included
• Smart-Post ground sleeves are used for temporary installation, which is ideal if fencing needs to be removed or replaced often; Each ground sleeve measures 12" and includes a yellow debris plug
• One Auger bit is included with each kit, use it in your electric or battery powered drill; Don't crowd it or it screws into the ground; Let it work and don't push it; It will dig into the hardest soils, and you will have a pilot hole for the ground insert in a minute or two
• Returns may be subject to a 20% restocking fee